| STE3000 |
| STE3000F RF Shielded Test Enclosure (Forensics Edition)
DON'T LEAVE IT TO CHANCE that the evidence
is off the network have confidence without question by
securing it in our Forensic Shield Box. |
|
NOW with
Digital Video Recording (DVR) Capability
Only
$2,495.00
|
 Only
$1,495.00 |
RF Shield Box STE3000F Key Benefits
STE3000
- Custom designed for the forensics industry
- Wireless device testing
- Perfect for 802.11a, b, g
- Bluetooth, RFID, 3G testing
- Wide variety of I/O options
- Super isolation up to 18GHz
- Stock models to fit your custom applications
RF Shield Box STE3000F Specifications
- Designed specifically for forensic wireless device isolation and data retrieval
- RF absorbent foam liner
- Exclusive double lip RF tight gasket
- Universal I/O connector interface plate
- RF tight "hands-on" silver mesh gloves
- RF tight illuminated viewing window
- Gas filled cover strut
- Isolation:
- -90dB @ 1GHz
- -90dB @ 3GHz
- -80dB @ 6GHz
- Dimension:
- Outside: 12.75"H x 18"W x 12"D
- Inside: 8"H x 17"W x 10.5"D
|
Just as Ramsey has manufactured RF isolation test products for pager, two way, cellular, PCS, and WLAN
testing, Ramsey was right there to support the Forensic industry in their requirements for data isolation and collection of wireless communications devices. Forensic investigation of cell phones, PDA's, and other hand-held wireless devices
Forensics specifically requires complete hands-on manipulation of the wireless device to identify and extract data while maintaining complete RF isolation from the outside world.
Ramsey started with the patented STE3000B enclosure with two RF isolated hands-on gloves to provide complete hands-on access to the device. Viewing of the device is provided through the RF isolated illuminated viewing window. A RF filtered 6 outlet internal power strip is included to maintain power to the DUT
throughout test and observation to prevent possible loss
of data. From there, Ramsey pre-customized the enclosure for the typical
Forensic application. We included an RF filtered RS-232 serial bulkhead feedthru connector and an RF filtered USB1.1 data port bulkhead feedthru to give you data access to the wireless device under test or observation. Additional I/O connectors may be ordered to suite your specific needs
for Forensic applications. Looking for the standard in
Forensic testing? Ramsey has you covered.
DOWNLOAD
DATA SHEET |
| Want more information? Would you like a
quote? Do you need someone to contact you concerning this
product?
Click here for our
online product request form. |
|
|
| Custom Configuration Options |
| |
|
RF FEEDTHROUGH: |
BNC, TNC, SMA, SMB, UHF, Type-N |
FIBER OPTIC: |
Fiber optic bulkhead feedthrough, ST, FC |
DUST COVERS : |
Dust cover capes with security chains available for all RF feedthrough connectors |
RF FILTERED DATA: |
DB9 (10pF), DB9 (100pF), DB9 (1000pF), DB15 (100pF), DB15 (1000pF), DB25 (310pF), DB25 (1000pF), DB37 (310pF), DB37 (1000pF), RJ45/DB9 Filtered, RJ11/DB9 Filtered, USB1/DB9 Filtered |
POWER CONNECTIONS: |
4-Pole filtered barrier strip feed through, 6-Pole filtered barrier strip feed through, internal surge protected power strips (110VAC, 220VAC International) |
VENTILATION OPTIONS: |
Dual side mounted RF filtered vents with single filtered exhaust muffin fan, passive vent only |
RF ABSORBENT FOAM: |
Standard 1/2" thick RF absorbent foam liner provides 24dB attenuation. 3/4" thick foam is standard on the STE3800 and available as an option to provide a flatter response |
FIBER TRANSCEIVER : |
Icron Technologies USB 2.0 Fiber Transceiver System available for devices up to 480 MB/s |
Note: RF Isolation specifications are measured at 1
meter with terminated RF feedthrough coaxial connectors installed. Actual isolation & attenuation can be affected by adding additional filtered and non-filtered connectors. Check with us for specific connector specifications.
STE series I/O interfaces, connectors, and options are frequently updated. Check with us for updates. |
|
| |
| |
|
| |
